Home / News

Lead Intelligent Launches 600 MPa Warm Isostatic Press for Solid-State Batteries

Date:11-19-2026

Lead Intelligent Equipment unveiled a warm isostatic pressing (WIP) system for all-solid-state batteries at CBIS 2026, claiming it closes the densification step that has blocked solid-state cells from moving to GWh-scale lines. The equipment was detailed in early November 2026 ahead of the Shanghai conference.

Solid-state cells replace the liquid electrolyte with a solid, which is the source of both their safety and energy-density advantage and of their manufacturing problem. Without a liquid to wet the interfaces, contact between electrode and electrolyte depends on mechanical pressure. Residual porosity raises interfacial resistance; excessive pressure cracks the brittle electrolyte. The process window is narrow, and it is a pressure-and-temperature problem, not a chemistry problem alone.

Key specifications

  • Temperature range: ambient to 150 C, control accuracy plus or minus 2 C
  • Pressure: up to 600 MPa, three-dimensional uniform loading, control accuracy plus or minus 2%
  • Result: cell density above 95%
  • Working chamber: 400 mm internal diameter, 4,000 mm effective length, about 500 litres
  • Heat-up: 3 hours to 150 C
  • Automation: automatic loading and unloading, fixture circulation, hot-air preheat and cold-air dry, three-channel real-time deformation monitoring, automatic pressure compensation and emergency relief

Why it matters

Isostatic pressing is the step where solid-state manufacturing most resembles powder metallurgy rather than battery assembly, and it is the least mature part of the line. Equipment vendors that solve densification at production takt time become the bottleneck-breakers for every cell maker's roadmap. Lead Intelligent says it has delivered solid-state equipment to domestic and international battery makers and now covers electrode preparation, electrolyte membrane, slitting and stacking, isostatic pressing, and high-pressure formation and grading.

The deformation monitoring is the practical detail worth noting. At 600 MPa, a misaligned stack or a density gradient can crack a cell; detecting deformation in real time and relieving pressure automatically is what converts a laboratory press into a production tool.

What is not yet proven

Throughput in cells per hour, cycle time including load and unload, and cell-level yield after pressing are not disclosed. Density above 95% is a material metric, not a device metric; what matters commercially is capacity retention and cycle life of the resulting cells. Solid-state lines are still pre-volume, so no third-party production data exists.

Source

Reported by China Daily's business channel and CBIS 2026 conference materials, 6 November 2026. Chinese-language sources only.

Prev: Lyric Robot Ships Complete All-Solid-State Battery Production Line to a Tier-1 Chinese Cell Maker

Next: China