Home / News

China

Date:11-19-2026

Beihao Marine Power rolled out China's first high-power 10 MW polar icebreaking azimuth pod thruster at Changxing Island, Shanghai, on 20 October 2026. The unit ships to a European shipyard in late November, is scheduled for installation in February 2027, and will begin sea trials in June 2027.

A podded thruster combines the electric motor, gearbox and propeller in a steerable pod below the hull. For ice-class vessels it is the single most heavily loaded component: the pod must absorb direct ice impact, maintain torque under momentary overload and keep lubricant seals intact at low temperature. The segment has effectively been a monopoly, with ABB the reference supplier for high-power icebreaking pods.

Key specifications

  • Power: 10 MW class, full electric azimuth propulsion
  • Icebreaking capability: 2.1 m, including 20 cm of snow cover
  • Overload: 160% torque in icebreaking duty
  • Configuration: enables both bow-first and stern-first icebreaking when installed
  • Verification: tested on a 40 MW full-load rig, 18 checks including 150% overload and 120% overspeed
  • IP: 77 granted patents covering motor design, control, structure and stainless-steel propeller blades

Why it matters

Northern Sea Route traffic and polar research demand are rising, and ice-class propulsion is a hard gate on shipbuilding. Until now a Chinese yard bidding an ice-class vessel had to budget a European pod with a long delivery slot. Beihao is described as the second supplier globally, after ABB, able to offer a high-power polar icebreaking pod, and the first unit going to a European yard is a deliberate reference sale: if a European owner accepts it, the export case for Chinese polar tonnage gets materially easier.

The full-load rig test is the technically meaningful part of the announcement. Pod failures in ice are usually structural or seal-related and appear under overload rather than at rated power, so 150% overload testing is a proxy for the failure mode that actually matters.

What is not yet proven

Rig testing is not ice trials. Real ice loads are stochastic and include impact events a test bench cannot fully reproduce. Seal integrity, bearing life and maintenance intervals in service remain unknown until the 2027 sea trials and subsequent operation. There is also no disclosed order book beyond the first unit.

Source

Reported by Shangguan News, Jiefang Daily and Sina, 20 October 2026. Chinese-language sources only.

Prev: Lead Intelligent Launches 600 MPa Warm Isostatic Press for Solid-State Batteries

Next: China