Xin Hai Jing 1, China's first extra-large trailing suction hopper dredger using a distributed in-hold pump layout, was delivered in Qidong, Jiangsu, in late October 2026. The vessel has a maximum hopper capacity of 27,929 cubic metres and a maximum dredging depth of 120 metres.
Conventional hopper dredgers group the dredge pumps in one central pump room. That arrangement forces long suction lines and concentrates weight and heat in a single space, which becomes a design constraint as hulls grow. Xin Hai Jing 1 splits the pumps between a forward and an aft pump room, one on each side of the hopper.
The distributed pump layout solves a real hydrodynamic problem: shorter suction runs reduce line resistance and help balance the ship's centre of gravity across loading conditions, which improves stability and discharge efficiency in a 28,000 cubic metre hull. The design is described as filling a gap in Chinese dredging engineering rather than copying an existing reference vessel.
The 120-metre dredging depth matters for deep-water sand extraction and for maintaining approach channels as ports deepen. The environmental numbers are also commercially relevant: about 20% lower carbon emissions and roughly 30% higher dredging efficiency than a conventional vessel of the same class, achieved through pump layout, hull form, hybrid drive and energy management.
Efficiency and emission figures are design and trial values, not multi-season operating data. Reliability of the distributed pump arrangement under abrasive sand duty, and the maintenance access implications of splitting pump rooms, will only become clear in service. "Unmanned dredging" is qualified as typical conditions.
Reported by China Youth Daily and China Water Transport, late October to early November 2026. Chinese-language sources only.